Plastic Case Waterproof Power Supply
Plastic case waterproof power supply LEYU 12V 3A Smps Power 35W LED Driver Supply IP67 Isolated High Reliability LPV-35-12 psu.
We sell good quality power supply, and accept small quantity orders .We have large stocks and this support us to make a very prompt shipping. If you order, we will choose the most suitable shipment for you and inform you the freight in advance, decision will be made by you.
For your satisfaction and convenience, we accept payment via T/T, Paypal, Western Union, if you need more and large quantity we can talk the price with each other;
Your enquiry will be quickly response, we will choose the most suitable products and quote the best price for you.
LEYU plastic case waterproof power supply LPV-35-12 is our plastic model, and the weight is light, but stable quality for using outdoor, it works well in some moist and dusty environment, so 35W LPV-35-12 is a light and practical model, is well sold all around the world.
Constant voltage design
Universal AC input/Full range
Withstand 300VAC surge input for 5 seconds
plastic case waterproof power supply has short circuit/ over load/ over voltage protection
Cooling by free air convection
Small and compact size
IP67 waterproof level
Fully isolated plastic case
Class II power unit, no FG
Suitable for LED lighting and moving sign applications
100% full load burn-in test
Low cost, high reliability
2 year warranty
0 ~ 6A
0 ~ 3A
0 ~ 2.4A
0 ~ 1.5A
0 ~ 1A
Ripple & Noise
Setup, Rise Time
500ms, 20ms/230VAC 500ms, 20ms/115VAC at full load
Hold Up Time
50ms/230VAC 16ms/115VAC at full load
90 ~ 264VAC 127 ~ 370VDC
47 ~ 63Hz
Cold Start 55A at 230VAC
0.25mA / 240VAC
110 ~ 150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Protection type: Shut down o/p voltage, re-power on to recover
-30 ~ +65℃ (Refer to “Derating Curve”)
20 ~ 90% RH non-condensing
Storage Temp., Humidity
-40 ~ +80℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 45℃)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
UL1310 class 2,CAN/CSA No.223-M91,CB IEC61347-2-13, IP67 approved, design refer to TUV EN60950-1
I/P-O/P>100M Ohms / 500VDC / 25℃ / 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A,EN61000-3-3
Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, EN55024, light industry level, criteria A
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4.Derating may not be needed under low input voltage. Please check the static characteristics for more details.