12V Waterproof Power Supply
LEYU 100W 12V waterproof power supply 12V Single Output Constant Voltage Switching Power Supply LED Driver LPV-100-12. LEYU Co.,Ltd. was established in 2005 as a professional Power Supply manufacture.Our products cover the following series: Switching Power Supply, water proof IP67 Led driver...
LEYU 100W 12V waterproof power supply 12V Single Output Constant Voltage Switching Power Supply LED Driver LPV-100-12.
LEYU Co.,Ltd. was established in 2005 as a professional Power Supply manufacture.Our products cover the following series: Switching Power Supply, water proof IP67 Led driver ,AC/DC converter.These products are widely used in the fields of LED strip,CCTV system,Outdoors power supply, Interruption accident etc.
LEYU 100W 12V waterproof power supply LPV-100-12 is our conventional product in IP67 degree. It’s 12V regular output is more suitable for industrial using, and the good outlook is more welcome to market, moreover, the light weight is saving the freight cost.
100W 12V waterproof power supply LPV-100-12 good quality based on the professional technology ,like glue filling ,aging, and we have most serious workers on the producing line, most professional engineer for guiding.
The 100W 12V waterproof power supply LPV-100-12 have necessary certification for other country import.
Constant voltage design
Universal AC input/Full range
Withstand 300VAC surge input for 5 seconds
Protections: short circuit/ over load/ over voltage
Cooling by free air convection
Small and compact size
Fully encapsulated with IP67 level
Fully isolated plastic case
Suitable for LED lighting and moving sign applications
100% full load burn-in test
Low cost, high reliability
2 year warranty
Ripple & Noise
Setup, Rise Time
2000ms, 25ms/230VAC 2000ms, 25ms/115VAC
Hold Up Time
50ms/230VAC 14ms/115VAC at full load
90~264VAC 47-63Hz; 127~370VDC
Cold Start 75A at 230VAC
110-150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Protection type: Shut down o/p voltage, re-power on to recover
-25 ~ +70℃ (Refer to “Derating Curve”) 20-90% RH non-condensing
10~500Hz,2G 10min,/1cycle,period for 60min,each along X,Y,Z axes
I/P-O/P>100M Ohms / 500VDC / 25℃ / 70% RH
UL8750, CSA C22.2 No.250.13-12, UL879,CSA C22.2 No.207-M89, IP67 approved, design refer to EN60950-1
EN61000-4-2,3,4,5,6,8,11,EN55024,light industry level, criteria A